N30 e A30Heating and cooling function applicable for the lead-free soldering of various boards.
Energy saving design considering the global warming.
Compact design emphasizing the productivity and floor environment.
Flux recovery function that increased the degree of cleanliness of oven exhausted air.
Added rich productivity management information for operation status, history and output management.
Electrical wiring and structure frame design that improve the maintenance-ability. Specification
| MODEL NAME |
A30-K82 |
A30-K102 |
A30-K122 |
N30-K82 |
N30-K102 |
N30-K122 |
|
Apparent Power (Kw) (under stable condition)
|
40kw
|
46kw |
55kw |
42kw |
49kw |
58kw |
|
Approximately Average Power Consumption (kw)
|
9.5kw
|
13kw |
61kw |
10kw |
13kw |
16kw |
| Operating Voltage (V) |
3Ø 380V 50Hz / 60Hz (3Ø 220V 50Hz / 60Hz) |
| Operating Current (A) |
61A(105A) |
70A(120A) |
83A(145A) |
64A(110A) |
75A(129A) |
88A(152A) |
| Outline Dimension (LxWxH) |
3,938 x 1,340 x 1,450 |
4,938 x 1,340 x 1,450 |
4,938 x 1,340 x 1,450 |
4,413 x 1,340 x 1,450 |
4,938 x 1,340 x 1,450 |
5,633 x 1,340 x 1,450 |
|
Weight (kg)
|
1,800
|
2,000 |
2,100 |
2,500 |
2,800 |
3,000 |
| Number of Heating Zones |
8
|
10 |
12 |
8 |
10 |
12 |
| Heating Zone Length (mm) |
2,200
|
2,700 |
3,200 |
2,200 |
2,700 |
3,200 |
|
Number of Cooling Zones
|
2 |
2 |
2 |
2 |
2 |
2 |
| Cooling Method |
Air Cooling
|
Air Cooling |
Air Cooling |
N2 Atmosphere Cooling |
N2 Atmosphere Cooling |
N2 Atmosphere Cooling |
| Chiller(op) |
Chiller(op) |
Chiller(op) |
Chiller |
Chiller |
Chiller |
| PCB Transfer Speed |
0.3 ~ 1.6m/min
|
| PCB Transfer Direction |
Left → Right(Right → Left) |
| Fixed Conveyer Rail |
Front Rail(Rear Rail) |
| PCB Dimension (mm) W |
50 ~ 410(500:Option) |
| Conveyor Belt Height (mm) |
885 ~ 920mm from floor(Normally 900mm) |
| PCB Conveying Method |
SUS #35 Chain 4mm Pin |
| Temperature Meter |
16ch |
20ch |
24ch |
16ch |
20ch |
24ch |
| Hot Air Speed |
Approximately 0.5 ~ 4.0 m/sec at Pre-heater & Reflow |
| PCB Drop Detection |
Photo Sensor |
| PCB Stop Detection |
Photo Sensor |
| Auto Stop |
Stops after no-load operation for 30 minutes since the system is turned off |
| Oxygen Concentration Control |
- |
- |
- |
O2 Analyzer |
| Oxygen Concentration Indication |
- |
- |
- |
O2 Controller |
| Nitrogen Consumption |
- |
- |
- |
12 ~ 15m3/h(Based on 500PPM) |
| Alarm Monitor |
PC Monitor Indication/Emergency Stop/
Conveyor Problem/Cover Opened/
Board Drop Alarm/Board Stop Alarm/
Abnormal Temperature Alarm/Thermal Alarm |
PC Monitor Indication/Emergency Stop/
Conveyor Problem/Cover Opened/
Board Drop Alarm/Board Stop Alarm/
Abnormal Temperature Alarm/Thermal Alarm/
Abnormal %, PPM/N2 Pressure |
| Others |
PC, UPS, Mesh Belt or Anti-warp Conveyor |
|
FeaturesHeating System
Air flow furnace with high heating efficiency is realized by adopting multi heating zones so that it can be applicable for the various types of component placement on board and at the same time by applying the nozzle structure for which the air flow resistance is improved.
Multi heating zones and new air flow method allow the temperature profile with stable wind speed.
Even the placement of components on the boards such as multi-layered board or the board where components of high thermal capacity are mixed, which was difficult to perform placement with existing reflow can be realized with extremely little temperature difference between board and placed component.
For small boards for portable equipment, the production cost, roductivity, energy consumption can be reduced and improved to a great extent by reducing the tack time.
 |  |
PC Control System
PC reflow with various functions
Reflow oven control
More improved and subdivided error message function
Convenient operation and handling through the classification and indication of increased temperature zone, reached temperature, etc. in colors according to the temperature setup.
• Graphic numerical control of setup temperature of each zone Designing of Maintenance
Considering high efficiency, productivity and cost reduction, we have simplified the maintenance of the blower motor, conveyor and cooling unit and improved the convenience of the operation through efficient machine design and electrical wiring. |
