The ACR Multi‐Axis Conformal Coating System (MACCS) provides a reliable robotic conformal coating application platform for low, medium and high volume batch and inline conformal coating processing.

Equipped with programmable software and servo motor control, the straightforward design means ease of application and maintenance at all levels of the conformal coating cycle.

MOTION CONTROL:
Type: Servo motors, slides on XYZ axes, 560 degree rotation axis
and 20 degree valve tilt mechanism
XYZ Repeatability: 25 microns (0.001”)
XYZ Resolution: 25 microns (0.001”)
X‐Y Velocity: up to 800 mm/s (32”/s) max

COATING AREA:
XYZ travel: 500mm x 480mm x 90mm (19.6” x 18.9” x 3.5”)

PCB HANDLING:
BATCH
PCB Fixture: 500mm x 480mm x 90mm (19.6” x 18.9” x 3.5”)
INLINE
PCB/pallet size:500mm x 480mm x 90mm (19.6”x 18.9”x 3.5”)
Conveyor Type: Chain
Min Conveyor Width: 50mm (1.97”)
Max Conveyor Width: 480 mm (18”)
Edge Clearance: 4.7mm (0.185”)
Transport Height: 940mm ‐ 965mm (37” – 38”)
Communication: SMEMA

STANDARD FEATURES:
In situ camera for manual alignment
Front toughened glass for ease of viewing and maintenance
Door Interlock controls for safety
Purge and solvent cups for flushing
Coating software, XP based, On‐Board PC
Remote teach pendant
Internal UV and white light

FLUID DELIVERY METHOD:
Standard Options:
1. Dual Atomised Spray & Needle Valve
2. Non‐Atomised Film Coating Valve

COATING FEED OPTIONS:
Cartridge or Pressure Vessel feed

FACILITIES REQUIREMENTS:
System Footprint: L: 1325 W: 1065 H: 1760 mm
(L: 52.1” W: 41.9” H: 69.2”)
Air Supply: 80 PSI dry, clean air
Extraction: 600 CFM
Power (Mains): 120/220 VAC, 50/60 Hz
System Weight: 450 Kg’s
Standards Compliance: CE

OPTIONAL FEATURES:
Low level material sensor
Built‐in exhaust fan with air flow indicator
Bar code reader
Viscosity control of fluid
Multiple head configuration
Laser pointer